JDS Drainage

This property had a rainwater gully going to a soak away which was not draining. I removed the old gully and installed a upvc replacement...

My customer required a new gully to take away the rainwater from a roof. I excavated down to a clay foul pipe, cut a section out and...

This job was to find the source of a leaking water main. We cut a square in the tarmac with a petrol spinner and broke out with a small...

This was a cast iron soil stack which had been badly split due to the cold weather. We replaced the cast iron pipework with a new plastic...

My customer needed to re-route the kitchen waste pipes so that a doorway could be installed where the pipes currently ran. We installed a...

My customer's existing rainwater run had become cracked and was full of roots, preventing the water from running away from the house. I...

We had to find and fix a 25mm watermain pipe which had been leaking for some time. We excavated down to a depth of 500mm to find the...

This pump chamber/grease trap was in desperate need of attention. Once emptied we found the chamber to be heavily encrusted with fat...

My customer was having problems with blockages in the pipework between a treatment plant and a soakaway, so wanted the pipework altered...

This was an investigatory dig up on a foul pumping station outlet pipe. This pipe was damaged and every time the pumps would kick in, the...

We were called to deal with an old collapsed inspection chamber. After clearing away around the old chamber, we removed the old unstable...

My customer was experiencing regular blockages in a clay gully. Upon investigation with CCTV we found that the clay trap was severely...

My customer was experiencing reaccuring blockages which we determined was due to a damaged inspection chamber. We removed the old...